Acurite 00896 Rain Gauge User Manual download pdf (Page 3)

Before Getting Start

Getting Started (Power reset procedure)

1. Please make sure batteries are inserted into the indoor rain monitor first

and the display appears. The unit will go into “sync mode” for 6 minutes.

2. Insert batteries in the outdoor rain gauge transmitter.

3. In the “sync mode” the indoor rain monitor will receive the outdoor

transmission signal within 6 minutes.

4. At the synchronization period, the antenna wave icon will keep blinking on

the rain monitor display.

5. When the antenna wave icon stops blinking and remains on the display, this

means synchronization has occurred and the main unit has gotten the signal

from the transmitter unit.

6. Once the synchronization has occurred, the indoor rain monitor will detect

updated rainfall information from the transmitter every minute

automatically.

7. If the antenna wave icon does not appear on the display after the 6 minutes

synchronization period, it means synchronization has failed.

8. Indoor rain monitor will start synchronization again after 2 minutes until

synchronization successful.

During the synchronization period, press any key to stop the synchronization

procedure.

1 2 3 4 5

No comments

Acurite 00896 Rain Gauge User Manual Page 3