AcuRite 00611A2 Manual download pdf (Page 2)

Introduction

Thank You for purchasing this Acurite

product. Please read through this

manual in itʼs entirety to fully enjoy the benefits and features of this

product. Please keep this manual for future reference.

NOTE: A protective film is applied to the LCD at the factory that must be

removed prior to using this product. Locate the tab and simply peel to

remove.

Overview

SETUP

Battery Choice & Temperature Range

Extended periods of cold temperatures ( below -4ºF / -20ºC ) can cause

alkaline batteries to function improperly. This will cause the outdoor

wireless sensor to stop transmitting temperature readings. Use lithium

batteries in these low temperature conditions to ensure continued

operation for wireless sensors placed outdoors. NOTE: Rechargeable

batteries are not recommended due to higher operating voltages.

Installing Batteries - Wireless Sensor

Installing Batteries - Display Unit

Remove the battery

compartment cover. Install

2 fresh “AA” batteries as

shown here.

BATTERIES

MUST BE INSTALLED FOR

THE SENSOR TO OPERATE

Remove the stand and

battery compartment

cover.

Install 2 fresh “AA”

batteries into the

battery compartment.

Replace the battery

compartment cover.

Outdoor

Temperature

Wireless Signal

Reception Indicator

Outdoor Relative

Humidity

Indoor Temperature

Outdoor Temp.

Trend Indicator

Indoor Relative

Humidity

Main Unit Detachable Stand

Remove Attach

Included with the main unit is a detachable stand for table top placement.

1 2 3 4

Comments to this Manuals

No comments

AcuRite 00611A2 Manual Page 2

Comments to this Manuals

Related products and manuals for Weather stations AcuRite 00611A2