Acurite 01035 Weather Station User Manual download pdf (Page 12)

WEATHER ALARMS:

Each weather category (example- “OUTDOOR TEMP” category

shown below) features alarm options. The alarm options are

displayed to the left of the currently selected weather category.

Alarms are all set to “OFF” by default upon powering on the display

console.

NOTE: Some weather categories will only have either low alarm OR

high alarm options. For example, WIND SPEED only has a HIGH

wind speed alarm. In these cases, only the relevant alarms for the

selected weather category may be set.

ALARM VALUE ADJUST MODE:

To adjust an alarm value for the currently selected weather category,

press AND HOLD the “ALARM” button for the alarm you wish to set.

Note the adjust (ADJ) indicator

TURNING ALARMS ON or OFF:

After you have adjusted and set an alarm value, you will note that

the alarm is NOT automatically turned on. This is done to help prevent

“false alarms” and also allows you to set all your preferred alarm

values ahead of time without having to turn them all off when you

are finished.

To turn an alarm ON, press the alarm button. You will note the

“OFF” will change to “ON” momentarily, and then the alarm value

will be displayed. This alarm is now “ON”, and the display console

will alert you when this value is reached with an audible alarm and

an alarm icon indicator on the display.

SILENCE A SOUNDING ALARM:

When an alarm is sounding, the weather category display will

automatically change to show the affected category and alarm

(flashing). The affected weather data on the display console will also

flash.

The alarm will sound initially for a few minutes, then silence itself.

The alarm will then sound every few minutes afterwards until one of

the following takes place.

1. “SNOOZE”- To silence a sounding alarm, press any button. This

will act similar to the “SNOOZE” function on an alarm clock. The

alarm will silence, but will sound again if the alarm condition still

exists later.

2. Turn the alarm “OFF”- The only way to permanently silence any

potential alarms is to turn the alarm “OFF”.

To adjust the alarm value, press the down or up buttons. When you

are finished making adjustments to the alarm value, press the

“ALARM” button again to confirm your adjustments.

Weather Category Alarm Functions

USE USE

press and HOLD “ALARM”

to enter into adjust mode

ADJ

press “ALARM” to

turn alarm on or off

press to adjust

the alarm value

down or up

2120

1 2 ... 7 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments

Acurite 01035 Weather Station User Manual Page 12

Comments to this Manuals

Related products and manuals for Thermometers Acurite 01035 Weather Station